Illuminated Magnifier: Use for detecting the smaller than 1x visible debres on o-ring or sealing surfaces.

Ceramic Scissors: Eliminating all corrosion, use for general cutting applicaations.

Ti Tweezers: Use Ti tweezers for reaching into the smallest of places for the most delicate tasks.

Sample Holder: Equipped with 3 metal fingers to grip/hold screws, or cleaning wipers.

400nm UV Light:  Used to find lint on o-rings, or particulates inside of dome surfaces.

White Light: This high intensity light helps to show any lint on o-ring surfaces, or scratches on sealing surfaces.

Fiberglass Oxide Removal Tool:  Use to clean any oxidized contacts inside or outside the housing.

Ceramic File:  Used to clean thick oxides from corroded connectors, or general purpose filing.

Contact Cleaning Liquid:  Use to clean and lubricate any electrical contacts inside or outside of the housing.  Safe for battery chargers as well.

Spare Yellow Tube with Cap:  Use to store batteries, screws, or any small items.

Yellow Tube with Sample Black Lint Free Wiper:  Use to clean your o-rings, or any camera surface.

Yellow Tube with 10 Lint Free Swabs:  Use to clean o-ring grooves.

Air Blowing Bulb:  Use to clean o-ring grooves, or blow lint or dust off of any critical surfaces.

Lens Cleaning Brush:  Use to clean any dust that remains after blowing off with air bulb.

2 Small Plastic Containers:  Use to hold batteries, screws, or other small items.

Titanium #2 Phillips Head Screw Driver:  Use for screws found on some "Quickie Mount" bases.

Ceramic 1.8mm Blade & #0 Phillips Head Screw Drivers:  Use for circuit board work, or any small screw driver task on computers, or eyeglasses.

6" & 12" Titanium 3/32" Hex Drivers:  Use for screws found on bottom of battery pods used for lighting systems.  These wrenches are required to service the circuit board a the bottom of the battery pod.

Titanium 1/16, 3/32, 1/8, 5/64, 5/32, 9/64, and 3/16 inch Hex Drivers:  Use for screws found on Bluefin housing and most regulators.

Set of 3 Titanium Wrenches 1/2 X 9/16, 5/8 X 11/16, and 26/32 X 3/4 inch:  Use for screws found on bottom of battery pods used for lighting systems.

Pin Wrench:  Use for removal and replacement of smart grip handles.

Titanium Pliers with Tungsten Carbide Cable Cutter:  Use for any griping, cable tying, or cutting job.

6 Inch Titanium Ruler:  Use for checking o-ring size and general measurement in and out of the water.